10 Best Camera Counterweights for Heavy Cameras in 2026: Balance Kits for Gimbals and Rigs

Balancing a heavy camera on a gimbal or shoulder rig often requires more than careful motor adjustment. The right counterweight can shift the center of gravity, reduce strain, and help your stabilizer perform more consistently.

This roundup compares 10 counterweight kits, blocks, and clamps for popular DJI, Zhiyun, Moza, and 15mm-rod setups, with options ranging from compact 50g weights to heavier paired aluminum accessories.

Best 10 Camera Counterweights for Heavy Cameras Picks for 2026

Best Gimbal Counterweight Kit – SMALLRIG 3125

For filmmakers looking for camera counterweights for heavy cameras on a gimbal, the SMALLRIG 3125 is a compact solution for balancing long-lens setups. Its clamp attaches to the camera plate, while the included weights can be positioned or stacked to suit different configurations.

Best For: Gimbal users balancing cameras with long lenses, particularly on DJI, Zhiyun, and Moza stabilizers.

Pros:

• Includes two 100g counterweights and a mounting clamp.
• Compatible with several DJI, Zhiyun, and Moza gimbals.
• Multiple 1/4-inch threaded holes allow flexible placement and stacking.
• Compact aluminum-alloy and stainless-steel construction is convenient to store.

Cons:

• The included counterweights total only 200g, which may not suit very heavy setups.
• Not water resistant.

The SMALLRIG 3125 is a practical pick when you need modest, adjustable counterweight capacity without adding much bulk to a gimbal kit. Check your stabilizer and camera-plate compatibility before buying.

Best Heavy-Duty 15mm Rod Set – Acouto Aluminum Counterweights

This Acouto set is aimed at shoulder rigs and 15mm rod systems that need substantial camera counterweights for heavy cameras. It includes two 2.2-pound blocks, offering a higher counterweight load than compact gimbal-focused kits while retaining an aluminum-alloy construction.

Best For: Shoulder-mount rigs and 15mm rod setups that need approximately 4.4 pounds of counterweight capacity.

Pros:

• Includes two 2.2-pound (1kg) counterweight blocks.
• Compatible with 15mm rods and many shoulder-mount rigs.
• 60mm track-hole spacing supports integration with compatible equipment.
• CNC-finished aviation aluminum alloy is designed for durability.

Cons:

• At about 2.14kg total, it adds considerable weight to a rig.
• Not intended as a universal gimbal counterweight kit.
• Not water resistant.

Choose this set when stability and rear-weighting matter more than keeping the rig ultralight. Confirm your shoulder rig uses compatible 15mm rods and mounting-hole spacing.

Best Adjustable Gimbal Set – NEEWER GA001

The NEEWER GA001 provides camera counterweights for heavy cameras on a range of gimbal stabilizers. Its clamp uses a knurled locking knob for tool-free installation, and multiple threaded positions make it easier to fine-tune the balance for long-lens configurations.

Best For: Users of DJI, Zhiyun, and Moza gimbals who want adjustable mounting positions and a compact two-weight kit.

Pros:

• Includes two 100g counterweights and a mounting clamp.
• Compatible with DJI RS-series, Zhiyun Crane, and Moza stabilizers.
• Multiple 1/4-inch holes support different mounting positions.
• Counterweights can be stacked, and the clamp installs without tools.

Cons:

• The kit provides only 200g of included counterweight capacity.
• Maximum weight recommendation is listed as 100g.
• Not water resistant.

The GA001 is a flexible choice for gimbal balancing when you value quick adjustments and broad stabilizer compatibility. Its relatively light included weight makes it better suited to moderate correction than very heavy camera builds.

Best Shoulder-Rig Value Set – KIMISS 15mm Counterweights

The KIMISS set is designed for shoulder rigs that use 15mm rods and need camera counterweights for heavy cameras. Its two aluminum-alloy blocks provide approximately 2.1kg, or 4.6 pounds, of total rear weight for balancing larger camera configurations.

Best For: Shoulder-mount camera rigs using 15mm rod systems and compatible 60mm track-hole spacing.

Pros:

• Provides approximately 2.1kg (4.6 pounds) of total counterweight.
• Designed for 15mm connection rods.
• 60mm hole spacing fits many compatible shoulder-rig components.
• Aviation-grade aluminum alloy and CNC construction support durability.

Cons:

• Not designed for the gimbal platforms listed for the smaller clamp kits.
• The substantial weight may reduce portability.
• Compatibility depends on the rig’s rod system and hole spacing.

The KIMISS set makes sense when a shoulder rig needs meaningful rear balance and your existing hardware matches its 15mm, 60mm mounting specifications. Verify those dimensions before purchase.

Heavy-Duty Gimbal Balance – SMALLRIG 200g Removable Counterweight

For photographers looking for camera counterweights for heavy cameras, the SMALLRIG AAW2285 provides a substantial 200g of balancing weight for compatible gimbal setups. Its stainless steel construction, textured surface, and stackable 1/4″-20 design make it useful when a camera or lens needs more precise stabilization adjustment.

Best For: Balancing heavier camera and lens combinations on DJI Ronin, Zhiyun, and other compatible gimbal stabilizers.

Pros:

• Provides 200g of counterweight for more demanding balancing needs.
• Stackable through its 1/4″-20 screw and threaded hole.
• Stainless steel construction resists corrosion.
• Textured surface helps improve grip during installation and removal.

Cons:

• Mounting plate is sold separately.
• Its fixed 200g weight may be more than needed for lighter setups.

This is the strongest option in the group for users who need a larger balancing adjustment, provided they already have a compatible mounting plate. Optional 100g and 50g SMALLRIG weights can also help fine-tune the setup.

Fine-Tune Balance – LT Easiyl 50g Stackable Weight

The LT Easiyl 50g block is a compact choice for shoppers comparing camera counterweights for heavy cameras when they need smaller, incremental adjustments. Its removable, stackable format works with compatible counterweight plates and clamps used on DJI Ronin and Zhiyun gimbal systems.

Best For: Fine-tuning camera and long-lens balance when a 50g adjustment is sufficient.

Pros:

• Lightweight 50g format supports precise balance adjustments.
• 1/4″-20 screw and threaded hole allow stacking.
• Knurled surface improves handling and grip.
• Stainless steel construction offers durability and rust resistance.

Cons:

• Only one 50g counterweight is included.
• Mounting clamp is not included.
• May require multiple weights for substantially heavier setups.

This weight is best treated as a modular fine-tuning component rather than a complete balancing kit. Check your existing plate or clamp before ordering, since the required mounting hardware is separate.

Compact Gimbal Support – CAMVATE 1.8 oz Counterweight

The CAMVATE 1.8 oz counterweight is a compact option for users seeking camera counterweights for heavy cameras and compatible support systems. Its stainless steel body uses a 1/4″-20 female-to-male threaded design, allowing it to be stacked when additional balancing weight is needed.

Best For: Adding a modest, stackable balance adjustment to camera gimbals or support rigs with 1/4″-20 compatibility.

Pros:

• 1.8 oz weight provides a smaller balancing increment.
• Female-to-male 1/4″-20 threading supports stacking.
• Stainless steel construction is durable.
• Compact 1.5″ x 1.5″ x 1″ dimensions suit space-conscious setups.

Cons:

• Its 1.8 oz weight may be insufficient for very heavy camera combinations.
• Compatibility depends on a matching 1/4″-20 support or mounting setup.

Choose this CAMVATE model when you want a small, stackable counterweight rather than a large balancing block. Its threaded format makes it adaptable, but the relatively modest weight is better suited to incremental corrections.

Heavy-Camera Balance Pair – NICEYRIG 50g Counterweights

For filmmakers looking for camera counterweights for heavy cameras, this NICEYRIG set provides a straightforward way to offset a heavy-sided setup on a compatible gimbal. The two stainless-steel weights total 100g and attach through built-in 1/4-inch threading.

Best For: Balancing cameras such as the BMPCC 4K or 6K on DJI, Zhiyun, and FeiyuTech gimbals.

Pros:

• Includes two 50g weights for a total of 100g.
• Compatible with several DJI Ronin, Zhiyun Weebill/Crane, and FeiyuTech gimbals.
• Built-in 1/4-inch screw and threaded hole support flexible mounting.
• Stainless-steel construction offers corrosion resistance.

Cons:

• Mounting clamps are not included.
• Each weight is fixed at 50g, so adjustment requires adding or removing units.
• Not water resistant.

This is a practical option when a pair of moderately heavy, threaded weights is all you need. Verify your gimbal and mounting-clamp compatibility before ordering.

Adjustable Gimbal Kit – Universal Clamp and Counterweights

This KOQINVIZ kit is designed for camera counterweights for heavy cameras when mounting position matters as much as weight. Its adjustable clamp fits gimbal arms up to 16mm, while multiple 1/4-inch threaded holes let you fine-tune placement.

Best For: Users who want a clamp-and-weight system for DJI Ronin or Zhiyun gimbals and need flexible mounting positions.

Pros:

• Includes an adjustable mounting clamp and two counterweights.
• Seven 1/4-inch threaded holes provide multiple mounting positions.
• Weights can be stacked for larger counterweight requirements.
• Tool-free knob installation includes an anti-scratch pad.

Cons:

• Clamp is specified for gimbal arms within 16mm.
• Only two weights are included, so heavier setups may require additional weight.
• Compatibility should be checked against the specific gimbal arm and camera setup.

Among these options, this is the most adaptable kit for experimenting with balance and weight position. Its adjustable clamp and threaded layout make it useful for changing lenses or accessories.

Clamp-Mount Solution – NICEYRIG 3.5oz Counterweight Kit

For camera counterweights for heavy cameras, the NICEYRIG 324 combines a height-adjustable clamp with a single 3.5-ounce counterweight. The clamp provides threaded mounting points on four sides, making it easier to position the weight around a compatible gimbal.

Best For: Balancing BMPCC 4K and similar camera setups on supported DJI Ronin, DJI RS, and Zhiyun gimbals.

Pros:

• Includes a dedicated clamp and one 3.5-ounce counterweight.
• Four sides feature 1/4-inch-20 threaded holes.
• Adjustable height from 23mm to 36mm.
• Rubber padding helps prevent scratches during mounting.

Cons:

• Only one counterweight is included.
• Weight capacity is limited to the specified 3.5 ounces.
• Not water resistant.

This kit suits buyers who prefer an integrated clamp rather than sourcing a separate mounting accessory. Its adjustable height and four-sided threading provide useful placement flexibility within the stated weight limit.

How We Picked the Best Camera Counterweights for Heavy Cameras

We compared these products by weight options, mounting method, stated compatibility, adjustability, construction, and likely use case. Because counterweights are highly setup-dependent, compatibility claims should be treated as a starting point: verify your gimbal model, camera plate, lens position, rod diameter, and available clearance before ordering.

We included dedicated gimbal weights, 15mm-rod counterweight sets, threaded blocks, and clamp-based kits. This mix covers mirrorless and DSLR-style cameras, long lenses, shoulder rigs, and stabilizers that need fine front-to-back or side-to-side balance.

Quick Comparison

• Best for broad gimbal compatibility: SMALLRIG and NEEWER clamp-based kits.
• Best for 15mm shoulder rigs: the universal aluminum alloy sets from KIMISS and similar rod-mounted options.
• Best for fine adjustment: 50g blocks and SMALLRIG’s 200g removable counterweight.
• Best for threaded mounting: the CAMVATE 1/4-inch-20 counterweight.
• Best for compact paired balancing: NICEYRIG’s 50g x 2 set.

Key Buying Factors for Camera Counterweights for Heavy Cameras

Weight and Adjustability

Choose enough mass to correct the imbalance without overloading the gimbal motors or rig. Smaller 50g blocks are useful for precise tuning, while 200g or multi-pound sets suit larger offsets. Removable or stackable designs are more versatile than a single fixed weight.

Mounting System

Check whether the counterweight attaches to a 15mm rod, a dedicated clamp, a 1/4-inch-20 thread, or a model-specific gimbal bracket. The mounting point must be secure and should not interfere with the camera plate, battery, follow-focus motor, or gimbal axis.

Compatibility and Clearance

Confirm the exact gimbal generation and mounting orientation. A listed fit for an RS2 may not guarantee clearance on an RS3 or RS4. Also check lens diameter, cage dimensions, rod spacing, and whether the added weight can be positioned far enough from the pivot to produce the needed leverage.

Build Quality and Handling

Aluminum weights are generally durable and relatively easy to carry, but the clamp and fasteners matter just as much as the block itself. Look for secure tightening, clean threads, and a design that will not shift during movement.

Who Should Buy Which Camera Counterweights for Heavy Cameras?

Gimbal users with changing camera setups should prioritize a clamp kit with multiple weights or removable blocks. Shoulder-rig users will usually get the most flexibility from a universal 15mm-rod set. Long-lens users should choose a counterweight that can mount opposite the lens and provide enough leverage without blocking controls.

If you only need a small correction, select a compact 50g or 200g option rather than carrying a heavy pair. For larger cameras, cages, and accessories, use a sturdier multi-weight kit and rebalance every axis after installation. Counterweights should improve balance—not compensate for an overloaded or improperly configured gimbal.